How To Use A Table Saw Step By Step

You can use the ruler that comes with your fence to find the accurate position of the fence.

How to use a table saw step by step. Clamp the material firmly to a workstation. That is why you need out-feed support or a table to help in holding the board as it leaves the table saw. This prompts people to use a flat surface such as a table.

Understanding the Different Parts. Measure and mark the cut line. How To Use A Table Saw.

Set the blade height line up you mark with the appropriate side of the blade remember table saw blades usually have an 18th kerf account for this. How to Use a Table Saw 1. Stand on the side and never stand directly behind the blade when ripping.

When using a table saw or jointer It is recommended to use a push stick for what reason. Turn on the saw and firmly hold the work piece to the miter gaugesled. Lets drive below for more.

Once your right-hand gets to the edge of the table saw pick the push shoe and place it at the back edge of the table saw the board. Remember to always keep the wood a few inches away from the blade and always hold the wood with both hands. Release the locking lever on your table saw which will let you position the fence into the desired place and lock it.

If you want to make a cross cut by the table saw then line the mark up by eye on the wood or you may mark on your board by pencil. Keep it flat against the table saw blade. Then plug on the unit and turn it on.