How To Clean Iron Fireplace Tools

Clean Fireplace Tools and Accessories Lay out a large tarp that will fit the screen grate and fireplace tools.

How to clean iron fireplace tools. Once you have worked out the rust prepare a work place for yourself. Remove the andirons from the fireplace and take them outside to clean them. To remove corrosion from brass tools you can try the combination of lemon and salt or hot vinegar and salt.

How to Carefully Remove a Heavy Fireplace Insert from Your FireplaceNo Mess and Without AshhttpyoutubenT6yS9HDv3MFireplace inserts a. Is it Time to Replace Your Fireplace Tools. You may go through several cloths in the process.

They are available at hardware stores. How to Clean Cast Iron Tools The fireplace tools used to reposition burning logs in the fireplace inevitably get covered in soot. Dip the emery cloth in cooking oil and rub in one direction not round and round and when it is clean polish it with a Cape Cod Metal Polishing Cloth.

Remove the cast iron cover from the fireplace hearth and place it on a protective surface such as newspaper or an old sheet. Wipe with methylated spirit and a cloth If any dirt is clinging to the iron put a little methylated spirit on a cloth and use it to wipe down the grate. Finish off by painting with high temp paint using either wood stove paint or grill paint.

Rub the iron paste in using the small brush or cloth and allow the paste to dry for 4 hours. Try a piece of lemon dipped in salt or hot vinegar and salt to remove corrosion from brass. This will remove fine dust.

You may also use your garden hose to remove dirt and stain. Dampen a cotton cloth with a few drops of mineral spirits and wipe down the fireplaces surfaces with it. Start off with a wire brush to remove surface dirt and rust.