What Do You Do After Sanding Wood
While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.
What do you do after sanding wood. Even the best abrasives throw off a few granules while sanding. Sanding wood removes flaws in wood like dents gauges or mill marks. Applying a stain can help make surfaces appear brighter and more lustrous.
What different is that you will need to go to extra length to prepare the project for staining. Even better is vacuuming every surface and crevice of your project with a shop vacuum fitted with a good quality filter designed to trap the microscopic dust. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits.
While you can use any cloth to do this a tack. You will need to use mineral spirits after sanding. Examine perimeter of all rooms and remove any visible edger swirl by hand-sanding.
Use a pole sander or a buffer over the entire floor at 100 or 120grit to blend the straight sanding cut from the drum with the circular sanding cut from the edger. You will have a much smoother clean finish to the topcoat of your wood project if you only sand between coats of polyurethane and skip sanding the final coat. Secondly throw on some gloves because you dont want mineral spirits and paint stripper residue all over your hands.
Sanding a wood deck provides a clean smooth surface and removes any splinters or rough patches. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining. Brush the stain liberally onto the table following the natural direction of the grain.
Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. Wipe down your wood and remove any dust. And a 36-grit granule caught under a 60-grit belt will leave an ugly gash in the floor.