How To Use Carbide Turning Tools

Carbide turning inserts like all other metal cutting tools are identified with a series of letters and numbers.

How to use carbide turning tools. Safety of Carbide Tool Products. Shaping a bowl blank goes pretty quick with a carbide turning tool. Indexable carbide tools and inserts are widely available as they are almost unanimously used in CNC Turning.

When grinding the turning tool should be placed in the horizontal center of the grinding wheel and the tip of the tool should be slightly upward for about 3 8 When the turning tool contacts the grinding wheel it should move horizontally in the left and right directions. Here is how I use carbide tools for turning pens. Cutting Power for Turning.

Conventional HSS tools like the spindle roughing gouge shown above have the cutting edge ground like a chisel. You must use care when handling them so that you dont cut yourself. If one side of a carbide cutting tip wears out depending on the cutter shape the tip can be rotated to a new fresh sharp area.

We will guide you step by step through the process of turning your own bowl on the lathe with Rocklers easy-to-use carbide turning tools. Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line. In use you angle the tool so the bevel rides the wood then tilt the handle up to begin the cut.

CBN. Ensure safety guards and goggles are used. Wearing heavy gloves is a good idea.

Suggestions on How to Use Cutting Tools. Indexable tooling uses steel tools with a screw or clamp securing a carbide insert to the end of the tool. Once youve got it lined up the way that you want it use the inside of the carbide insert as a guide and scratch a circle into the steel tool shaft.