How To Prime Exterior Wood For Painting
Priming all bare wood caulking fillers sealing trim allowing primer to properly dry.
How to prime exterior wood for painting. Use a wide flat paintbrush to apply the paint to the wood. Although the traditional way is to de-gloss by sanding priming is an easy way to put down a low gloss base before you paint. Prepare the Surface With old buildings such as my 130-year-old barn water-blasting the loose paint is not a recommended practice.
Prime Exterior Wood Of House Before Painting. To help the new paint adhere to the surface well Handyguy Brian advises to prime when painting over a glossy paint. Going over all facets reasons why prime before painting is required over old paint on wood siding.
Prime any bare wood with a latex primer that is tinted toward the finish color and allow the primer to dry thoroughly before starting to paint. Scraping scrubbing and sanding. To Summarize Prepping Exterior Trim For Paint Sanding filler caulking edges where trim meets another substrate allowing to dry.
Then rinse it let it dry prime the bare wood and add your topcoat. Allow the paint to dry before applying a second coat and then paint the back if you wish. Another key step preparing trim for paint is priming.
Then spot-prime every nail head separately and paint the surface with a quality latex coating. Fill the paint sprayer with paint. Before you prime the wood must be clean and its advisable to sand it lightly to open the grain.
Begin by scraping off old paints. To start off priming use sandpaper to scrape off the previous paint or to even out the bumps on your surface. Spray a coat of paint onto the surface using even side-to-side sweeps and overlapping strokes.