How To Prepare Woodwork For Painting Uk
Then open any windows you are planning to paint so they dont get sealed shut.
How to prepare woodwork for painting uk. A sanding machine can be used cautiously for a large surface if preferred. Paintwork with only a few light blemishes can be prepared by sanding. If need be place some wood filler onto a filling knife and work it into the wood.
It is a good idea to wash dirt and grime off of the woodwork using either warm soapy water or sugar soap. Allow the primer to dry then give it a quick sand with a fine sandpaper to smooth it down. Simply remove imperfections and give the woodwork a key an adhesive surface for the new paint to cling to.
Go over each area of the wood with your sandpaper to remove part of the top layer of paint but dont apply too much pressure as youll remove too much. Clean thoroughly with sugar soap sand down with a fine paper to give a key for the new paint and then apply your paint. Paint the woodwork undercoat Step 1 Remove fittings and apply masking tape to areas you want to protect on the windows skirting boards architraves and doors.
When I was an apprentice we had to prepare woodwork for painting by hand. Remove any nails or screws. Preparing previously painted wood.
Wear a mask for sanding existing paintwork as older paints contained lead and this can be dangerous. Lightly coat the wood with your solution three times waiting half an hour between each coat to allow the wood to dry. You should then fill any holes and cracks with.
Nowadays I do it by using a palm sander. This will give the floor paint something to adhere to and stop the paint from just soaking into the wood. If your woodwork is bare you should consider treating it with a knotting solution first.