How To Prepare Stained And Varnished Wood For Painting

Before going on let the surface dry for a few minutes.

How to prepare stained and varnished wood for painting. For a smoother finish you could try 240-grit sandpaper. Step 1 Sand the stained or varnished furniture using 220-grit sandpaper. After applying the putty and ensuring your wood is nice and smooth prepare to sand your wood.

Purchase My recommended Tools Brushes Paints and Primers Here. This helps the paint bond more tightly and lasts longer. Remove the damp cloth immediately after you cleaned the varnished wood.

Then follow these general preparatory steps for painting over stain. Fill any surface dents holes and dings. However you can use any deglosser for 15 minutes wipe the surface to prepare the surface for painting.

The sanding gives the paint a better surface to grip. Apply two coats using a high-quality synthetic-fiber paintbrush. Apply the putty filler with a scraper or a putty knife like the knife from Titan tools or Warner so that it is applied thoroughly and evenly.

Generally paint doesnt adhere to the slippery surface of varnished wood thats why sanding is required. These fast-drying paints form a tough protective shell that allows you to wipe off greasy stains with soapy water. Sanding works well on flat surfaces.

4 Prepare the cupboard surfaces for painting. Painting over varnished Wood Discussion in Painters Talk started by Ruds Jun 21 2005. Apply it evenly across both sides and around all edges using a good quality brush.