How To Prep Wood For Stain After Sanding
When using Water Based Pre-Stain Wood Conditioner allow it to penetrate for 1-5 minutes then remove any excess.
How to prep wood for stain after sanding. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining. The most important part of finishing a piece of furniture happens before you open a can of stain or paint it starts with the sanding. On certain woods such as oak and ash pre-wet the wood with a damp cloth to raise the grain before final sanding.
This process is called popping the grain. This raises the hairs in the grain so you can remove them. If you choose this method make sure you only use a wet rag to apply the water.
What different is that you will need to go to extra length to prepare the project for staining. Check the weather in your area. Use a palm sander or a random orbital sander to quickly strip away imperfections and previous layers of stain to reveal the underlying natural wood.
Before scrubbing with a stiff bristle broom. Wipe down your wood and remove any dust. Let the cleaner sit for 10 to 15-min.
Lightly sand the deck with a drywall sanding pad and 150-grit sanding screen. Allow the dampened wood to dry 30 minutes before the final sanding. The technique of wetting the wood down before staining is called popping the grain.
Also dont apply the stain until the wood. When its smooth its ready for stain and there are two types commonly used oil-based and water-based. If you dont wipe down the wood before you apply your stain.