How To Prep Wood For Paint After Sanding

In addition primer fills the pores in the wood and makes your painted surface look much more even.

How to prep wood for paint after sanding. Apply oil-based paint primer. Generally paint doesnt adhere to the slippery surface of varnished wood thats why sanding is required. Pound-in any protruding nail heads.

Steps to take for cleaning wood before staining is similar to painting. When you water pop wood you wont have to do multiple coats of stain either. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain.

The primer also keeps any stains on the wood from coming through the paint. Ensure you rinse the rag between passes which also serves to remove all debris left behind from the sanding process. Popping the Grain The technique of wetting the wood down before staining is called popping the grain.

On certain woods such as oak and ash pre-wet the wood with a damp cloth to raise the grain before final sanding. Apply primer to the surface of the wood second coat if still translucent Prime the surface of the wood using a paintbrush or roller depending on the surface areas size and the number of details in the piece. Using a primer will give your paint a better surface to stick to.

This way you wont need sanding. There are only a few items required to prep wood trim for painting. Timing is critical when using a paint stripper.

If your project is for inside an oil-based primer will penetrate the wood best but if its. Blowing sanding dust off your wood project with an air compressor or brushing it. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining.