How To Prep Stained Wood For Painting
The best way to paint over stained wood is using quality primer paint in the recommended manner.
How to prep stained wood for painting. Using a paint brush or a rag apply an even layer of stain on the woods surface. Some DIY experts say its possible but we suggest sanding the wood for the best results. Adding a Clear Coat Varnish.
Sand the wood twice with a medium grit sandpaper 100 to 120-grit and twice with a fine grit sandpaper to remove any imperfections and prepare the surface for stain. Wait until each stain coat has dried before you apply another. Stain all of the surfaces of your project in one sitting.
After this use a clean rag and wipe off any stain thats pooling on the wood. You dont have to worry about being neat or applying stain in the direction of the grain. Use latex primer and paint when painting over a water-based wood stain.
Preparing your bare wood surface correctly will allow your coating to penetrate and adhere properly. Another important element of getting the best result is patience. The next step to preparing the stained wood is washing it.
Dont rush things youll be fine. Paint the woodwork with an oil-based primer to seal the surfaces and prevent the stain. To sand and prepare wood before staining first identify the type and grit of sandpaper to be used.
All sanding should be performed in the direction of the wood grain. When it comes to sanding stick with 150g 220g sand paper. Apply multiple coats of stain to the wood as necessary to get the darkness you are looking for.