How To Paint Raw Wood

Apply the first layer of finish satin semi-gloss or gloss and allow it to dry.

How to paint raw wood. Wood primer can be either water or solvent-based. The light scuffing action will produce a more textured surface that promotes proper paint adhesion. Sweep an orbit sander over the wood in wide circular strokes.

It will protect your paint from organic compounds in the wood that will bleed through your paint. If it is splotchy then apply a second coat. Shellac based primers are great for sealing wood knots and sap streaks.

Sand the surface of the wood. A good primer will also prevent your paint from soaking into the wood so you dont have to use multiple coats of paint for the coverage you want. Once the primer has fully dried apply the top coat.

Before you prime the wood must be clean and its advisable to sand it lightly to open the grain. After youve done this wipe away all sanding dust with a tack cloth avoid using a water-dampened rag. Sanding and preparing wood before staining diy paint 101 surface prep miss mustard seed how to achieve smooth results when painting wood how to distress furniture in 6 easy steps tural digest how many coats of primer on wood 5 step pro paint.

You can apply primer with a brush roller or by spraying and one coat is all you need. Now apply the first coat of primer and let it dry. This will keep spilled paint from spoiling the bottom surface.

If you are deciding to paint bare wood you should seal all knots spot prime with a shellac based primer. I isolated the quarters for the pic below to show pure raw wood on the left picture taken on the back of the board raw wood satin poly in the center and raw wood dead flat varnish satin poly on the right. Brush the primer on in the direction of the grain.