How To Paint Chipped Woodwork
Ive got chipped bannisters rails and spindles that I need to repaint and the though of stripping them back to re paint fills me with dread.
How to paint chipped woodwork. The wife wanted a chipped paint look on the baseboards and trim in a bedroom. If the chip is along the edge. Stop when it becomes too difficult to pry away the paint.
In this tutorial our Wickes experts show you how to prepare interior woodwork for paintingSubscribe to the Wickes YouTube channel here. Lightly coat the wood with your solution three times waiting half an hour between each coat to allow the wood to dry. Sand the filler down to blend in with the wood surface using a hand sanding block outfitted with fine-grit sandpaper.
Apply wood filler to deeper chips using a craft stick to trowel in a tiny bit of filler at a time. Woodwork is painted by either spraying or brushing. Preparing your woodwork If your woodwork is bare you should consider treating it with a knotting solution first.
Smaller spots can be treated the same way or you can purchase an exterior spackling compound which wont require any additional mixing. Remove Loose Paint by Brushing. Remove the lid and let the paint sit open for a few hours.
Step 1 Scrape loose chipped paint from the surface using a putty knife or wire brush. Step 1 Fill Surface Using a putty knife scoop out some Ready Patch and smooth it over the surface of the crater left by the chipped paint. Work it in several directions to fill any nooks and crannies.
Add calcium carbonate or any of these additives to. Patch large holes and gouges with wood filler. Here is a very simple method to ge.