How To Make A Wooden Spoon On A Lathe
Mount the blank on a woodturning lathe.
How to make a wooden spoon on a lathe. Over the course of time the surface may become whitened due to fragmentation of the fibers with repeated use and washings. Just apply another coat of sesame oil and the finish is restored. Take some 150 grit sandpaper and sand the flat part of the dowel.
Like carving out table legs he then began cutting away the excess wood. Then assemble all the pieces needed to make the spoon. With the lathe off I used a fine tooth hand saw to cut the in-progress cedar spoon off the lathe and my waste pieces.
The spoons are marked out using a template prepared for the project and cut on the band saw. Hillhouse began his creation by sandwiching a piece of brightly colored paduak between two pieces of walnut which he then offset on his lathe for multi-axis turning in order to achieve a distinct pattern for his spoons. A well cared for spoon can last for generations.
How To Make A Wooden Spoon On The Lathe Woodturning Project - YouTube. Steps to Making Wooden Scoops on a Lathe. For heavily used spoons a light sanding before reapplication of the oil is all that is needed.
Sand the outside and inside of the bowl using power tools such as drill or Dremel. Next I go to the lathe and put it between centers and turn it down into a round handle and spoon shaped ball. Attach a faceplate to the blank using screws.
Start with a coarse grit sandpaper and progressively work your way through finer and finger grits until you reach the desired level of smoothness. How to Make Wooden Spoons. Using a drill to sand the bowl.