How To Make A Wood Spoon On A Lathe
Once the shape of the spoons was created it was then time to refine the design into the actual utensils.
How to make a wood spoon on a lathe. Step 2 Trace the spoon pattern onto the wood with a pencil or marker. Then they may use a saw to remove waste from the spoon bowl and use some hollowing process to carve the inside of the spoon bowl. With the lathe off I used a fine tooth hand saw to cut the in-progress cedar spoon off the lathe and my waste pieces.
I like to make spoons also but I do it with the lathe. Some spoon makers turn a blank on the lathe. Possible dimensions for your wooden spoon.
After the first five slabs from center have been cut the grain changes enough that the handles would be weakened so I stop there. Using the bandsaw I rough cut the form drawn. Mark a pattern of a spoon on a board.
How To Make A Wooden Spoon On The Lathe Woodturning Project - YouTube. How to Make Wooden Spoons. On my cut spoon I marked out the edges or walls of the spoon.
This gives a very symmetrical round handle and outside of the bowl of the spoon. Some even mount this on the lathe and turn it out. Used the bandsaw to cut along this Line.
The spoons are marked out using a template prepared for the project and cut on the band saw. The spoon pattern shown below can be resized and printed to match your piece of wood. Draw a rough outline of the desire spoon on a piece of wood.