How To Make A Homemade Desktop Charger

Besides it can hide the tangled wires which makes your countertops more beautiful.

How to make a homemade desktop charger. Besides some basic tools you only need plywood and a quartet of hairpin legs to pull it off. Avoid hot glue as this will leave lumps in your mouse pad. The toggle switch and potentiometer are added in the front.

Make sure your wall box measures at least 3 x 2 x 25 2. Read the instructions included with the USB charger and consult an electrician if you are not sure about any part of them. If you are using fabric use fabric glue or a spray adhesive for the best results.

Connect the wires together red to red and black to black by soldering or wire twisting unreliable Cover the individual wire connections together with electrical tape having 2 separate pieces cover the black to black separately and red to red separately. Watch the video tutorial for details on how to build your own desk just like it. Step by step guide on how to build this custom all wood desk for computers studying work bench whatever you need.

Make four holes in the box in the desired positions to put the toggle switch pot adapter jack and the charging led. You can simply use a pencil or a wooden skewer to make holes. It is big enough to put some phones once.

I am NOT an electrician our install was very simple but your wiring may be different. NOW take the wire of 1 mm thickness and pass it through the hole made in the center this is extra bit of wire for electrical connections. First of all cut a small circle of diameter 1 cm with a cardboard glue it to a piece of cardboard and make a hole in the center.

Hi friends today I am going to show 12v Battery Charger With Old SMPS. Here I cut and remove all output wires without yellow black and greenThen I connect. Just use a paintbrush to spread a thin even layer of glue onto the surface of your base and then smooth on your top layer of paper.