How To Get Paint Off Wood Trim Without Sanding

Remove the Polyurethane from Wood Apply the paint stripper to the wood surface of the element using a brush or spray.

How to get paint off wood trim without sanding. Stop when the bulk of the paint is gone even if some color remains. Videos you watch may be added to the TVs watch history and influence TV recommendations. Repeat until the tape is secured for the length of the trim.

Let it sit for a few minutes then score the glass along the edge of the wood where you want it to be a nice straight line Then turn the blade sideways and scrape the paint off the glass. While holding this starting spot in place pull out 6 inches of tape then firmly secure it to the wall. Apply another topcoat to have an even coating and let it.

Be careful to not remove wood along with the paint. Allow it to penetrate the wood for 15 minutes. Using enough pressure to remove the paint but not so much that it damages the wood.

Place the edge on the surface at a 45-degree angle and use very light pressure to slide the razor blade along. Most woods do well with acrylic primers so you are supposed to get going with it. Sand it lightly with fine grit sandpaper taking care not to dig in to the trim by oversanding.

Allow the paint stripper to sit until the paint beneath begins to crack and bubble. Follow along as we paint the wooden trim in the bathroom. Select 3-to-4 inches of painters tape and firmly press it to the wall.

Paint over stained wood trim with as little sanding as possible while still getting a long-lasting finish that is smooth and streak free. Wipe it off with a lint free cloth. After 24 hours sand the primed areas lightly again with a fine-grit sandpaper.