How To Clean Sanded Wood For Painting

If you plan on using a water-based stain use Minwax Water Based Pre-Stain Wood Conditioner.

How to clean sanded wood for painting. Use a palm sander or a random orbital sander to quickly strip away imperfections and previous layers of stain to reveal the underlying natural wood. Unfinished wood should always be primed prior to painting. How to clean wood for painting is a question many ask once the project is finished.

When using oil-based conditioner allow it to penetrate into the wood for 5-15 minutes. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it. As such you should wipe the old wood surface with a mixture of 1 cup bleach 1.

If you plan on using an oil-based stain you must use the oil-based Minwax Pre-Stain Wood Conditioner. The hand brush will get rid of rough pieces and bits. It is good to use a shop vac to clean the surface between sanding grits removing the larger grit particles from the wood before sanding with the next higher grit.

Primer having high-solids content helps fill in the wood grain and creates a smooth surface for the finish coat. You want to remove any old paint flakes or dust thats been left on the surface. Remove dye stains paint and wood stain splotches and crayon marks with acetone or lacquer thinner.

Wash the entire wood surface once youre finished scraping andor sanding. For smaller wood items like furniture wash the wood surface with a. Next wipe down the wood surfaces with a dry clean cloth.

Dip a cloth in the water firmly squeeze it dry then wipe down the wood to remove all oils dirt and grime. Clean the wood surface thoroughly. It is the primary tool to clean the woodwork.