How To Build Trestle Table Legs
Make sure you measure accurately to get the best tight fit.
How to build trestle table legs. The top is constructed of 84 walnut which will be milled down to about 15 inches thick. You can use them to make a table a desk or shelves and theyre very easy to pack up and store. Screw in the 35mm screws in the pre-drilled ends and using your square ensure the cross member is perpendicular to the legs.
I wanted to do somethin. Here is what the rough cut walnut looks like when I get it from the supply store. This is how I make my 3x3 table or bench legs using only 2X4s and wood glue.
Trestle Table Top Build. Add glue to the joints and make sure the corners are right-angled. DIY Trestle Entry Table The Legs Reference Steps 4-6 here We wanted this table to have some BEEFY legs.
Repeat this process for the opposite side of the trestle. It can can be set up or taken apart in a minute or two using no tools a. Center the legs to the supports and lock them into place using 2 12 screws.
We set our table saw blade at 45 degrees and set up the fence to maintain as much of the width as possible. It is suitable for dining or as a work table. Most lumber stores dont carry what we needed so we decided to DIY it.
Attach to the table top using wood glue and finish nails. Cut the bevel edges using a miter saw. Here is what we did.