How Do You Prepare Exterior Wood Trim For Painting

Priming all bare wood caulking fillers sealing trim allowing primer to properly dry.

How do you prepare exterior wood trim for painting. Make sure to do your repairs pri. Now that youve sanded the wood enough for it to fully accept your primer and paint make sure you use an air compressor to get all the little dust particles off the surface fully. Reload the brush when necessary and maintain a wet edge Step 2.

Another key step preparing trim for paint is priming. For small shallow blemishes use an exterior spackling compound. A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste.

To Summarize Prepping Exterior Trim For Paint Sanding filler caulking edges where trim meets another substrate allowing to dry. Starting at a top corner of the door trim begin painting along the side edge of the trim where it meets the wall. Tackle any damp leaks or fungus before you repaint the surface or the finish wont last.

Rinse the trim thoroughly and allow it to dry completely before preparing the surface for primer and paint. Go over the old window trim thoroughly with a paint scraper like Hyde Tools Black. Repaint Trim Using Brush Roller.

The better you prepare the surface the longer your finish will last Its no good expending time money and effort maintaining external paint when the source of the damage hasnt been dealt with. Be sure to take time to prepare the surface to accept the new paint. Getting as much dirt grime dust debris off using a high pressure power washer.

Before painting wood siding fill large holes and gouges with a two-part resin filler such as Minwax High Performance Wood Filler. Wash Surface Wash the surface of the trim with a TSP solution or a low-phosphate household cleaner. Preparing Exterior Trim for Painting Step-by-Step.